FLOOR FINISH - HELIX THERM 5 GAL

A high solids floor polish formulation that requires less maintenance than conventional finishes. Elegant features a wet-look gloss and extended durability. It yields a long lasting and extremely hard yet flexible film. This product is for use on all types of floor surfaces from resilient tile to stone. Elegant works well with any low or high speed maintenance program.

USES:
Use in high traffic areas which are maintained with conventional buffing or high speed burnishing such as supermarkets, hospitals and nursing homes. Can be used on any floor not affected by water to produce a"diamond like" clear brilliance.

ADVANTAGES: Offers outstanding wet look gloss, durability, and produces a tough film that repels black heel marking to reduce maintenance costs while retaining a high brilliance. Can be maintained with a spray buff and responds to conventional floor machines as well as high speed burnishing.

DIRECTIONS FOR PRODUCT USE:

1. INITIAL APPLICATION
2. Remove all old wax and floor finish with appropriate stripper.
3. Rinse the floor thoroughly (at least twice) with clean water.
4. Repeat steps 1-2 if all old finish is not removed. Allow floor to dry.
5. Apply 3-4 thin coats using a clean synthetic mop, allowing a minimum of 30 minutes between coats.
6. Apply additional coats in same manner, allowing at least 30 minutes drying time between coats.
7. For very porous floors, an initial coat of floor sealer is recommended.

NOTE: Temperature, humidity and air movement affect curing time. To avoid contamination, do not return any used material to original container.

ROUTINE MAINTENANCE

1. Sweep or dust mop as necessary.
2. Damp mop with proper cleaner following label instructions. For accumulated soil, lightly scrub as needed.
3. After cleaning, spray buffing or burnishing may also be done once loose dirt and dust has been swept up.
4. Additional coats may be applied if needed.