FLOOR FINISH - HI-SHINE 30 GAL.
1009610

FLOOR FINISH - HI-SHINE 30 GAL.

  • 30 Gal.
  • An extremely high quality floor finish formulated with metal cross linked polymers for added resilience.
  • Can be used on any floor not affected by water including resilient tile, composition tile and terrazzo as well as varnished, painted or sealed wood and masonry flooring.
  • Produces a very high gloss without buffing, resists scuffs, scratches and powdering. Slip resistant, fast drying, detergent resistant, and can be spray buffed or high speed burnished.

Please Login to see your pricing for this product.
You may also be interested in:
FLOOR FINISH - HI-SHINE GAL.
1002486 FLOOR FINISH - HI-SHINE GAL.
FLOOR FINISH - HI-SHINE 5 GAL.
1002464 FLOOR FINISH - HI-SHINE 5 GAL.

Product Details

DIRECTIONS FOR PRODUCT USE:
INITIAL APPLICATION
  1. Remove all old wax and floor finish with appropriate stripper.
  2. Rinse the floor thoroughly (at least twice) with clean water.
  3. Repeat steps 1-2 if all old finish is not removed. Allow floor to dry.
  4. Apply 3-4 thin coats using a clean synthetic mop, allowing a minimum of 30 minutes between coats.
  5. Apply additional coats in same manner, allowing at least 30 minutes drying time between coats.
  6. For very porous floors, an initial coat of floor sealer is recommended.
NOTE: Temperature, humidity and air movement affect curing time. To avoid contamination, do not return any used material to original container.

ROUTINE MAINTENANCE
  1. Sweep or dust mop as necessary.
  2. Damp mop with proper cleaner following label instructions. For accumulated soil, lightly scrub as needed.
  3. After cleaning, spray buffing or burnishing may also be done once loose dirt and dust has been swept up.
  4. Additional coats may be applied if needed.

Additional Information

F&F-Supply 300
Part Number: 1009610
MFG Part Number:
Weight: 0.00 LB
Height: 0.00
Depth: 0.00
Width: 0.00
Size:
Product PDF: Product Datasheet
Extra Details: