STRIPPER - LASER RINSELESS 5 GAL

A non-corrosive, rinseless, mop-on stripper formulated to immediately rip off multiple layers of finish or sealer using cold or warm water. Strips off multiple coats of wax and finish without the use of a floor machine and stripping pad.Cuts through many layers of sealer and finish in minutes.No rinse is necessary when the residue is picked up with a wet vacuum. A tremendous time and labor saver. Non- corrosive.

DIRECTIONS FOR PRODUCT USE:
For best results, use of wet-vac is recommended

• Dilute concentrate per the chart above based on the amount of build-up.
• Apply to a small test area to determine the amount of time needed to adequately strip floor.
• Mop diluted solution liberally onto floor surface working in 5’ x 5’ sections or use autoscrubber for application.
• Allow to stand 4-5 minutes. Keep area wet.
• If surface is unusually dirty or scuffed, use mop, brush or floor machine to agitate and loosen dirt and finish; for stubborn marks scrub using a stripping pad.
• Pick up solution with a mop or wet-vac machine. No rinsing required if a wet-vac is used.
• Allow floor to dry.
• Apply first coat of finish or floor sealer in full uniform coat. Apply additional coats of floor finish as required.